Mikrotik > Montaje > "TP-SCPOE-24"

$83.93

Tycon Power TP-SCPOE-24 24 POE/Solar 8A Dual input BCC 24V

Tycon Power TP-SCPOE-2424 POE/Solar 8A Dual input Battery Charging Controller 24V In; 24V POE out. Up to 130W panel

 

Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications.


They have a built in POE inserter with DC to DC converter that delivers 12V, 18V, 24V or 48V at the POE port. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge.

 

The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.

Solar and Battery Connections are via 4 screw terminals for wire size up to 12AWG. POE Input and Output is via 2 RJ45 shielded connectors. There is a secondary 12VDC voltage output connector on the back with 5 screw terminals for connecting other electronics to the controller using up to 12AWG wire.

 

Product Specification

The controllers are externally fused with a standard replaceable fuse.

  • Features
  • Dual Input - Charges Batteries from Solar Panel and / or POE
  • Built in DC to DC converter with various POE output voltages available: 12V,18V,24V,48V
  • Compact and high temperature operation
  • Very low self consumption < 10mA
  • Applications
  • Remote Power Systems
  • Base Stations
  • UPS Systems